Skip to main content
Menu

Gas Revenue Collection L&G TSG: Step 2 – Power on Gas Meter

Power on Gas Meter at Gas meter position by pressing button A. If successful, the meter display will power on like this.



Having problems? See our Troubleshooting Guide below.


Troubleshooting

If there’s no power to the Gas Meter you’ll see a blank display.


Installer actions to rectify this:

  • Change Gas Meter once and repeat step 1.
  • If successful, return initial Gas Meter to pelli-locker. Place gas meter in completed orange return bag and fill out both sections 1 and 2a. For section k, write 'display / screen fault’. Now proceed to step 3.
  • If this doesn’t work, return both Gas Meters to pelli-locker, Place both gas meter in completed orange return bags and fill out both sections 1 and 2a, for section k write 'display / screen fault'.
  • Abort Gas Meter and install Legacy Prepay meter and commission PPMID