PPMID Credit TSG: Step 6 – HAN join after 2 minutes

Within 2 minutes the PPMID should join HAN. If successful, there will be:

• A solid Wifi symbol on PPMID
• A clock on PPMID updates
• A success triple beep emitted from PPMID
• Wait for 7 minutes to hear the triple beeps, if it does not work then press 'De-whitelist' and attempt new PPMID
• When consumption not shown, advise customer to leave PPMID connected/powered on for minimum of 7 days

• HAN LED is MFF

---

Troubleshooting

There are a few issues you may encounter:

Wifi symbol fails to come out of flashing status or clock on PPMID does not update

Installer actions to rectify this:

• Check distance /obstacles between PPMID and Comms Hub and move PPMID nearer to Comms Hub. If this is successful, repeat step 6.
• If unsuccessful, de-whitelist PPMID1, attempt with PPMID2 and go to step 2.
• If this is successful, return PPMID1 to pelli-locker as faulty.
• If unsuccessful, complete PPMID installation as 'Complete - No HAN on customer familiarisation screen’.
• Return PPMID1 to pelli-locker and leave PPMID2 plugged in on site.

HAN LED remains on LFF

Installer actions to rectify this:

• De-whitelist PPMID1, attempt with PPMID2 and go back to step 2.
• If successful, return PPMID1 to pelli-locker as faulty. Complete PPMID installation as 'Complete - No HAN on customer familiarisation screen’.
• Return PPMID1 to pelli-locker and leave PPMID2 plugged in on site.