Skip to main content

PPMID PAYG TSG: Step 1 – Connectivity

All Pay as you go customers must be offered a PPMID, contact TSS if you are unable to commission a PPMID.

Check ToughPad connectivity at meter position. If you are connected, you should see the Keepalive screen on ToughPad, like so.

Having problems? See our Troubleshooting Guide below.


If there’s no connection, you’ll see ‘This page can’t be displayed’ on ToughPad, like this.

Installer actions to rectify this:

  • Attempt to refresh the Keepalive screen on ToughPad. If successful, proceed to step 2.
  • If this doesn’t work, attempt to get signal within reasonable distance of the property. If successful, proceed to step 2.
  • If you still can’t get connected, contact TSS for next steps.