What to do

Move your in-home display to a plug socket closer to your electricity meter


The loss of information could be caused by either the distance of the in-home display from the electricity meter or interference.

The in-home display typically has a range of 20-30ft, interference will reduce this. It is recommended to move the in-home display closer to the meter so a stronger signal is received which would cause fewer dropouts of signal resulting in issues.

Did that solve your problem?

SolvedI still need help

What to do

Complete a Hard reset

Step 1: If the in-home display has a power button on the back then hold this down until the in-home display is switched off completely.

Step 2: If you can't find a power button disconnect the in-home display from the power supply and remove the batteries (if you are able to) for 1 minute.

Step 3: Re-insert the batteries and reconnect the in-home display to the power supply.

Step 4: The in-home display will then attempt to connect to the Smart Meter(s).

* It can take up to 24 hours for the information with regards to usage to re appear. Historical information will not be lost by performing a hard reset.

Did that solve your problem?

SolvedI still need help

Excellent news!

We're glad we could help.

Log into MyAccountHelp Centre home

Looks like you need some more help

Get in touch

Contact UsHelp Centre home